User Define" Window - Mitsubishi Electric MELSEC Q Series User Manual

7
UTILITY PACKAGE (SW1DNC-EIPUTL-E)
7.9.5

"User Define" window

Arbitrarily define Data Types other than INT and DINT and register them.
(1) Display and settings of the "User Define" window
List box
Text box
Define list
Item
Name
List box
button
Remove
Text box
Size[INT]
New button
Figure 7.28 "User Define" window
Table 7.22 "User Define" window items
Register Data Types in addition to the predefined Data Types (INT and DINT). Up to 256
Data Types can be registered.
Select a name of the Data Type that has been registered. Use to change the definitions of
the Data Types that have been registered.
The value in the parentheses displayed after the Data Type name is Data Size (units:
words).
Clicking this button after selecting a Data Type name in the list box will delete the
selected Data Type.
Set the name of a new Data Type to be registered. (Up to 40 one-byte alphanumeric
characters)
When a Data Type has been selected in the list box, the selected Data Type name is
displayed.
Set the size of the Data Type. (1 to 722 words)
When a Data Type has been selected in the list box, the size of the selected Data Type is
displayed.
When clicking this button after setting a Data Type name in the text box and the number
of words in "Size [INT]", a new blank define list is created.
7.9 "Setting" Tab (Parameter Settings)
Description
7.9.5 "User Define" window
1
2
3
4
5
6
7
8
7
- 48