Changing The Communication Settings Of Plcs From Ch1 In [Controller Setting] - Mitsubishi Electric RD81RC96-CA Manual

7.2 Changing the Communication Settings of PLCs from CH1 in [Controller Setting]

In this sample screen, statuses of PLCs are monitored by connecting PLCs to the channel No.1 of the GOT.
When connecting PLCs to the channels other than the channel No.1, change the settings as below.
■Setting Example: When connecting PLCs to the channel No.2
(1) Select CH2 in the [Controller Setting] tree and add the controller setting.
Please refer to "3.2 Controller Setting" for details on the settings.
The value of [GOT Communication Port No.] cannot be overlapped with the values of other channels.
(2) Go to [Search/Replace] - [Batch edit] to select [CH No]. Check [Project] under [Target] and click [Find Now] to
display "1" in [Before] and [After]. Change the "1" in "After" to "2" and click "Replace".
46/59
GT27/25
SoftGOT
BCN-P5999-1333-2a