Download  Print this page

Mitsubishi Electric MELSEC Q Series User Manual Page 120

Ethernet/ip network interface module for programmable controller.
Hide thumbs

Advertisement

5
PRE-OPERATION PROCEDURES
5
- 19
5.6 Self-Diagnostics of the EtherNet/IP Module
5.6.1 Hardware test
2) For error completion, check the setting of "Switch Setting for I/O and Intelligent
Function Module" and execute the self-loopback test again.
3) If the error is detected again, a hardware failure may have occurred in the
EtherNet/IP module.
Please consult your local Mitsubishi representative.

Advertisement

Table of Contents

   Related Manuals for Mitsubishi Electric MELSEC Q Series

This manual is also suitable for:

Qj71eip71

Comments to this Manuals

Symbols: 0
Latest comments: