Download  Print this page

Mitsubishi Electric MELSEC Q Series User Manual Page 96

Ethernet/ip network interface module for programmable controller.
Hide thumbs

Advertisement

4
FUNCTION
(2) Timing of the UCMM Tag communication
Turn on the Application Trigger request (Class3/UCMM)
(Un\G27072 to Un\G27087) on the Originator side.
Remark
(3) Parameter setting and program example
Figure 4.20 Window for Class3/UCMM Tag parameters setting of Utility Package
4
- 20
4.2 Tag Communication Function
4.2.3 UCMM Tag communication
A read or write request can be sent only while the Application Trigger request
(Class3/UCMM)(Un\G27072 to Un\G27087) is on.
SET
Originator
UCMM Tag
Figure 4.19 Timing of the UCMM Tag communication
For details of the Application Trigger request (Class3/UCMM)(Un\G27072 to
Un\G27087), refer to the following.
Section 3.3.12 Application Trigger (Class3/UCMM)
Complete the setting of UCMM Tag parameter in Utility Package.
Select the "Message" window on the "Setting" tab and set the details in the window
that is displayed when a blank line in the Tag Parameter list is double-clicked.
For details, refer to the following.
Section 7.9.4 (2) Display and settings of the "Message Tag" window
CHAPTER 8 PROGRAMMING
Target
Request
UCMM Tag

Advertisement

Table of Contents

   Related Manuals for Mitsubishi Electric MELSEC Q Series

This manual is also suitable for:

Qj71eip71

Comments to this Manuals

Symbols: 0
Latest comments: