Download  Print this page

Mitsubishi Electric MELSEC Q Series User Manual Page 62

Ethernet/ip network interface module for programmable controller.
Hide thumbs

Advertisement

3
SPECIFICATIONS
3
- 26
3.3 Buffer Memory
3.3.9 Input Area
POINT
(1) The addresses described in this section are applicable when the Common
Parameter is set by default. (
"Add Own Nic" window)
The addresses change depending on the Common Parameter setting.
Confirm the addresses in Utility Package or the buffer memory when
configuring the system.
(2) To receive data exceeding 16384 points, select "Extension Data Area" for
"Common Parameter" in the "Add Own Nic" window of Utility Package.
Set the auto refresh because the "Extension Data Area" data are not stored in
the buffer memory. (
Section 7.9.1 (1) Display and settings of the
Section 7.9.7 "Refresh Parameter" window)

Advertisement

Table of Contents

   Related Manuals for Mitsubishi Electric MELSEC Q Series

This manual is also suitable for:

Qj71eip71

Comments to this Manuals

Symbols: 0
Latest comments: