Download  Print this page

Mitsubishi Electric MELSEC Q Series User Manual Page 176

Ethernet/ip network interface module for programmable controller.
Hide thumbs

Advertisement

7
UTILITY PACKAGE (SW1DNC-EIPUTL-E)
Item
A Name Among The User Define List (Size)
No.
Offset
Define
Unit
Size
Add
button
button
Remove
Up
button
Down
button
Apply
button
7
- 49
7.9 "Setting" Tab (Parameter Settings)
7.9.5 "User Define" window
Table 7.22 "User Define" window items (Continued)
Define definition (element that configures the Data Type) in the registered Data Type.
Up to 256 Defines can be registered per Data Type.
A number is assigned and displayed every time a Define is added.
The offset (how many words from the start) of Define is displayed.
It is displayed as "Offset/Total Number of Words" after the
Set the Define name. (Up to 40 one-byte alphanumeric characters)
Select the Define unit.
"INT": 1 word (2 bytes)
"DINT": 2 words (4 bytes)
"BYTE": 1 byte
"BIT": 1 bit
Set the Define size.
•For "INT": 1 to 722 words
•For "DINT": 1 to 361 words
•For "BYTE": 1 to 1444 words
•For "BIT": 1 to 5120 bits
When a row in the define list is selected and this button is clicked, a new row is added
below the selected row. (Up to 256 rows)
When a row in the define list is selected and this button is clicked, the selected row is
cleared.
When a row in the define list is selected and this button is clicked, it is switched with the
row that is directly above it.
When a row in the define list is selected and this button is clicked, it is switched with the
row that is directly below it.
The Data Type name and size in the text box are registered in the list box along with the
settings of the define list.
(a) How to register a Data Type
Execute the following operations.
1) Set the Data Type name in the text box.
2) Set the size in "Size [INT]".
3) Click the
button.
New
4) Make settings for the blank define list that is created.
5) Click the
button.
Apply
The blank rows in the define list are deleted and the Data Type names are
registered in the list box.
(b) How to edit a Data Type
1) Select a name of the Data Type that has been registered in the list box.
2) Edit the define list that is displayed.
3) Click the
button.
Apply
The edited items are overwritten and reflected.
(c) How to delete a Data Type
1) Select a name of the Data Type in the list box.
2) Click the
Remove
Description
button on the right of the list box.
Apply
button is clicked.

Advertisement

Table of Contents

   Related Manuals for Mitsubishi Electric MELSEC Q Series

This manual is also suitable for:

Qj71eip71

Comments to this Manuals

Symbols: 0
Latest comments: