Download  Print this page

Mitsubishi Electric MELSEC Q Series User Manual Page 30

Ethernet/ip network interface module for programmable controller.
Hide thumbs

Advertisement

2
SYSTEM CONFIGURATION
(2) Support of the multiple CPU system
(3) Applicable software packages
Q00J/Q00/Q01CPU
Q02/Q02H/Q06H/Q12H/Q25HC
PU
Q02PH/Q06PHCPU
Q12PH/Q25PHCPU
Q02U/Q03UD/Q04UDH/Q06UD
HCPU
Q13UDH/Q26UDHCPU
Q03UDE/Q04UDEH/Q06UDEH/
Q13UDEH/Q26UDEHCPU
Q00UJ/Q00U/Q01U/Q10UDH/Q
20UDH/Q10UDEH/Q20UDEHC
PU
Q50UDEH/Q100UDEHCPU
Q03UDV/Q04UDV/Q06UDV/Q1
3UDV/Q26UDVCPU
2
- 3
2.1 Applicable Systems
(b) Mounting to a MELSECNET/H remote I/O station
The EtherNet/IP module cannot be mounted to any MELSECNET/H remote I/O
station.
Mount it together with a CPU module.
When using the EtherNet/IP module in the multiple CPU system, refer to the following
manual first.
QCPU User's Manual (Multiple CPU System)
(a) Applicable EtherNet/IP module
The function version of the EtherNet/IP module has been "B" from the first
release, which supports the multiple CPU system.
(b) Parameter writing from Utility Package
Write parameters only to the control CPU of the EtherNet/IP module.
Systems using the EtherNet/IP module and applicable software versions are shown
below.
• GX Developer or GX Works2 (Required)
For setting parameters to a QCPU and creating sequence programs.
• Utility Package (SW1DNC-EIPUTL-E) (Required)
For setting parameters and monitoring.
Table 2.2 Software packages
Item
Single CPU system
Multiple CPU system
Single CPU system
Multiple CPU system
Single CPU system
Multiple CPU system
Single CPU system
Multiple CPU system
Single CPU system
Multiple CPU system
Single CPU system
Multiple CPU system
Single CPU system
Multiple CPU system
Single CPU system
Multiple CPU system
Single CPU system
Multiple CPU system
Single CPU system
Multiple CPU system
Software version
GX Developer
Version 7 or later
Version 8 or later
Version 1.15R or later
Version 4 or later
Version 6 or later
Version 8.68W or later
Version 1.87R or later
Version 7.10L or later
Version 8.48A or later
Version 8.62Q or later
Version 1.15R or later
Version 8.68W or later
Version 8.76E or later
Version 1.31H or later
Cannot be used
Version 1.98C or later
Utility Package
GX Works2
(SW1DNC-EIPUTL-E)
Version 1.00A or later

Advertisement

Table of Contents

   Related Manuals for Mitsubishi Electric MELSEC Q Series

This manual is also suitable for:

Qj71eip71

Comments to this Manuals

Symbols: 0
Latest comments: