Mitsubishi Electric MELSEC Q Series User Manual page 83

4
FUNCTION
Remark
(3) Parameter setting and program example
Complete the setting of Class1 Tag Parameter in Utility Package.
Select the "Producer" or "Consumer" window on the "Setting" tab and set the details
in the "Producer Tag" or "Consumer Tag" window that is displayed when a blank line
in the Tag Parameter list is double-clicked.
Figure 4.6 Window for Class1 Tag parameter setting of Utility Package
For details, refer to the following.
For details of the Application Trigger request (Class1)(Un\G27008 to Un\G27023),
refer to the following.
Section 3.3.11 Application Trigger (Class1)
Section 7.9.2 (2) Display and settings of the "Producer Tag" window
Section 7.9.3 (2) Display and settings of the "Consumer Tag" window
CHAPTER 8 PROGRAMMING
4.2 Tag Communication Function
4.2.1 Class1 Tag communication
1
2
3
4
5
6
7
8
4
- 7