UTILITY PACKAGE (SW1DNC-EIPUTL-E)
(2) Display and settings of the "Producer Tag" window
Select an Own Nic No.
Set the Tag name.
Up to 100 one-byte alphanumeric characters can be used.
When the "Label (for GX Works2) Setting Enable" checkbox in the "Add Own Nic" window is selected, the Tag
GX Works2 Label Name
name set in "Tag Name" is automatically used as it is.
Select one from the following.
"INT": 1 word
Data Type name registered in the "User Define" window (
Set the data size to be sent to Consumer Tag. (1 to 722 words)
When selecting a Data Type name that has been registered in "Data Type" of the "User Define" window, the
size of the selected Data Type is automatically set.
Fixed to "Class1" for Producer Tag.
Set the conditions for Tag communications.
Fixed to "Cyclic" for Producer Tag. Tag communications are performed at the RPI interval.
Select the checkbox and set the receive range of the RPI sent from the connected device (Consumer Tag) in
"Default RPI", "Min RPI", and "Max RPI".
When the RPI sent from Consumer Tag is within the "Min RPI" and the "Max RPI" ranges, send the data with
the RPI that has been set by Consumer Tag.
When the RPI sent from Consumer Tag is not within the "Min RPI" and the "Max RPI" ranges, set the interval
for sending the data from Producer Tag.
Setting range: 5 to 10000 (Default value: 10000)
Set the minimum value of the receive range for the RPI that is sent from Consumer Tag.
Setting range: 5 to 9999 (Default value: 5)
Set the maximum value of the receive range for the RPI that is sent from Consumer Tag.
Setting range: 6 to 10000 (Default value: 10000)
Figure 7.23 "Producer Tag" window
Table 7.17 "Producer Tag" window settings
7.9 "Setting" Tab (Parameter Settings)
(Up to 32 alphanumeric characters when using a
Section 7.9.5 "User Define" window)
7.9.2 "Producer" window