7
UTILITY PACKAGE (SW1DNC-EIPUTL-E)
7.9.7
Set the refresh target device of the items below for each EtherNet/IP module.
This window is displayed when "Refresh Parameter" in the selection tree is double-clicked.
(1) "Refresh Parameter" window and setting description
7
- 51
7.9 "Setting" Tab (Parameter Settings)
7.9.7 "Refresh Parameter" window
"Refresh Parameter" window
• Send/receive data of Tag communication
• Error codes of own station
• Communication status of Class1 or Class3/UCMM Tag communication
• Error status for each tag
Figure 7.30 "Refresh Parameter" window