Download  Print this page

Rpi Set" Window - Mitsubishi Electric MELSEC Q Series User Manual

Ethernet/ip network interface module for programmable controller.
Hide thumbs

Advertisement

7
UTILITY PACKAGE (SW1DNC-EIPUTL-E)
7.9.6

"RPI Set" window

Use this window when configuring RPI (Request Packet Interval) of all Tags collectively.
This window is displayed when "RPI Set" in the selection tree is double-clicked.
(1) Display and settings of the "RPI Set" window
Item
Request Packet Interval(RPI)
Figure 7.29 "RPI Set" window
Table 7.23 "RPI Set" window items
The setting value is applied to "RPI" in the "Consumer Tag" window.
For the Class1 Tag communications, this will be the interval of data transmission from
Producer Tag to Consumer Tag.
When setting an RPI of Consumer Tag for each Tag, make RPI settings in the
"Consumer Tag" window. (
"Consumer Tag" window)
Description
Section 7.9.3 (2) Display and settings of the
7.9 "Setting" Tab (Parameter Settings)
7.9.6 "RPI Set" window
1
2
3
4
5
6
7
8
7
- 50

Advertisement

Table of Contents

   Related Manuals for Mitsubishi Electric MELSEC Q Series

This manual is also suitable for:

Qj71eip71

Comments to this Manuals

Symbols: 0
Latest comments: