5
PRE-OPERATION PROCEDURES
5
- 17
5.5 Setting from GX Works2
5.5.2 Switch setting for the intelligent function module
POINT
(1) Switch setting for I/O and intelligent function module takes effect when turning
off and on the power or resetting the CPU module after execution of Write to
PLC.
(2) When the setting of "Switch Setting for I/O and Intelligent Function Module" is
out of range, the ERR. LED turns on and a switch 1 error (error code: C000
is detected.
After correcting the setting, turn the power off and on or reset the CPU
module.
)
H