Mitsubishi Electric MELSEC Q Series User Manual page 222

9
TROUBLESHOOTING
(2) Checking by operating status
Errors occur when;
Ping test
Self-diagnostics
Parameter error
Tag
communication Communication error
Own station error occurrence
9
- 9 9.4 Error Code
9.4.1 How to check error codes
Error codes are stored or displayed in the following location.
Table 9.2 Classification and storage location of error codes
Stored in /displayed on
Execution result (Un\G27908)
Self-diagnostics execution result (Un\G27268)
Own station error status (Un\G27264)
•Own station error status (Un\G27264)
•Class1 Diagnostics Information (Un\G27392 to
Un\G27647)
•Class3/UCMM Diagnostics Information (Un\G27648 to
Un\G27903)
Own station error status (Un\G27264)
* 1 General CIP error code.
A general CIP error code is stored in the place where ** is shown.
Error code Reference
(Hex.) section
0400 Section 9.4.2 (1)
H
C400 Section 9.4.2 (6)
H
0500 to 054F Section 9.4.2 (2)
H H
C500 to C543 Section 9.4.2 (7)
H H
C000 to C020 Section 9.4.2 (3)
H H
C100 to C1BC
H H
Section 9.4.2 (4)
* 1
C2 * *
H
C300 to C306 Section 9.4.2 (5)
H H
CF10 to CF52 Section 9.4.2 (8)
H H