2
SYSTEM CONFIGURATION
2.2
Network Configuration and Components
This section describes the configuration and components of the EtherNet/IP network.
2.2.1
Network configuration
The following is a typical network structure where the EtherNet/IP module is used.
Connect the EtherNet/IP module to a 100BASE-TX or 10BASE-T network.
Network installation must be performed by a qualified professional since sufficient safety
measures are needed.
EtherNet/IP module
GX Works2
Utility package
EtherNet/IP
network device
Twisted pair cable
Figure 2.1 Network configuration
2.2 Network Configuration and Components
EtherNet/IP
network device
Switching hub
EtherNet/IP compatible
programmable controller
2.2.1 Network configuration
1
2
3
4
5
6
7
8
2
- 4