Mitsubishi Electric MELSEC Q Series User Manual page 191

7
UTILITY PACKAGE (SW1DNC-EIPUTL-E)
Item
HEX/DEC/BIN/ASCII/
ASCII(SWAP)
Table 7.31 "Consumer" window items (Continued)
Select the display format of "Tag Data View".
•When ASCII is selected, data except 20
When the selected Tag is of the Data Type that has been registered in the "User Define" window,
data are displayed as the configured Data Type. (
the "User Define" window)
When "Unit" of Define is "BIT", data are displayed as shown below.
•When "HEX", "DEC", or "BIN" is selected, data are displayed as "ON" or "OFF".
•When "ASCII" or "ASCII (SWAP)" is selected, data are displayed as ".".
7.11 "Monitoring" tab (Network Diagnostics)
Description
to 7F are displayed as ".".
H H
Section 7.9.5 (1) Display and settings of
1
2
3
4
5
6
7
8
7
- 64