Mitsubishi Electric MELSEC Q Series User Manual page 164

7
UTILITY PACKAGE (SW1DNC-EIPUTL-E)
Item
Tag Parameter list
Nic No.
Tag Name
Size(INT)
Connection Type
RPI Range
Max RPI
Min RPI
Default RPI
User Define
Start Device
End Device
Buffer Memory Address
Add button
button
Remove
Apply button
7
- 37 7.9 "Setting" Tab (Parameter Settings)
7.9.2 "Producer" window
Table 7.16 "Producer" window items (Continued)
The parameters set in the "Producer Tag" window are displayed. (
"Producer Tag" window in this section)
The parameters set in the "Producer Tag" window are displayed.
This indicates whether the RPI has been changed from the default value in the "Producer Tag" window.
"Able": Changed from the default value
"Unable": Not changed from the default value
The parameters set in the "Producer Tag" window are displayed.
When an item other than "INT" has been selected in "Data Type" of the "Producer Tag" window, the Data Type name
that has been registered in the "User Define" window is displayed. (
The auto refresh target device set in "Refresh Device" of the "Producer Tag" window is displayed.
The last device of the auto refresh target is displayed.
The start address of the buffer memory that the Tag occupies is displayed.
A blank line is added. (Up to 256 Producer/Consumer/Message Tags in total)
Clicking this button after selecting a Tag-registered row will remove the selected row.
The configured Producer Tag is applied to Utility Package project.
When it is applied, the rows where the Tag has already been registered are sorted in the order of "Nic No.".
(a) How to register a Producer Tag
Execute the following operations.
1) Click the
Add
2) Double-click the blank line that is added.
3) Configure the Tag in the "Producer Tag" window.
(b) How to edit a Producer Tag
Double-click the row where the Tag has already been registered.
(c) How to delete a Producer Tag
Double-click the row where the Tag has already been registered and click the
button.
Remove
Multiple rows cannot be selected simultaneously.
POINT
When deleting a Tag, the start addresses of the transmitted and received data of
the subsequent Tags will change.
To keep the start addresses of the transmitted and received data unchanged,
handle the Tag to be deleted as a reserved Tag, without deleting it.
A reserved Tag just reserves Data Area and does not communicate actually.
1. Double-click the row to be set as a reserved Tag.
2. The "Producer Tag" window will appear. Select the "Reserved Tag" checkbox.
3. Click the
OK
The row registered as a reserved Tag is displayed yellow.
Description
button.
button.
(2) Display and settings of the
Section 7.9.5 "User Define" window)