Mounting and sensor wiring
October 2023
2.3
Wire a remote-mount transmitter to the sensor
Use this procedure to wire a four-wire or nine-wire remote-mount transmitter to the
sensor.
Prerequisites
•
Prepare the nine-wire cable as described in the
Preparation and Installation
•
Connect the cable to the sensor-mounted core processor or junction box as described
in the sensor documentation. You can access all product documentation on the
documentation DVD shipped with the product or at Emerson.com.
14
Figure 2-3: Attaching and securing a painted aluminum transmitter to
mounting bracket
Tip
To ensure the mounting bracket holes are aligned, insert all attachment bolts into
place before tightening.
Guide.
Installation Manual
00825-0100-5710
Micro Motion 9-Wire Flow Meter Cable
Micro Motion 4700 CIO Transmitter