LIGHTING SYSTEM
5. Turn Signal and Hazard Light
System
A: WIRING DIAGRAM
1. TURN SIGNAL LIGHT AND HAZARD
LIGHT LHD MODEL
<Ref. to WI-220, LHD MODEL, WIRING DIA-
GRAM, Turn Signal Light and Hazard Light Sys-
tem.>
2. TURN SIGNAL LIGHT AND HAZARD
LIGHT RHD MODEL
<Ref. to WI-222, RHD MODEL, WIRING DIA-
GRAM, Turn Signal Light and Hazard Light Sys-
tem.>
B: INSPECTION
1. TURN SIGNAL SWITCH
<Ref. to LI-11, INSPECTION, Combination Switch
(Light).>
2. HAZARD SWITCH
Measure the hazard switch resistance.
Switch position
Terminal No.
OFF
6 and 7
1, 3 and 4
ON
7 and 8
Turn Signal and Hazard Light System
4 3 2 1
8
7
6
5
LI-00002
Standard
Less than 1 Ω
Less than 1 Ω
Less than 1 Ω
3. TURN SIGNAL AND HAZARD MODULE
Connect the battery and turn signal light bulb to the
module, as shown in the figure. The module is
properly functioning if it blinks when power is sup-
plied to the circuit.
LI-6
LI-00003