Epa Protocol Calibration - Teledyne T200 User Manual

EPA PROTOCOL CALIBRATION

When running this instrument for U.S. EPA compliance, always calibrate prior to use,
adhering to the EPA designation requirements for this instrument. (The official List of
Designated Reference and Equivalent Methods is published in the U.S. Federal Register:
http://www3.epa.gov/ttn/amtic/criteria.html
; this List specifies the settings and configurations
. Pay strict attention to the built-in warning features, periodic
for EPA calibration protocol)
inspection, regular zero/span checks, regular test parameter evaluation for predictive
diagnostics and data analysis, and routine maintenance. Any instrument(s) supplying the
zero air and span calibration gasses used must themselves be calibrated, and that calibration
must be traceable to an EPA/NIST primary standard.
Comply with Code of Federal Regulations, Title 40 (downloadable from the U.S.
Government Publishing Office at http://www.gpo.gov/fdsys/) and with Quality Assurance
Guidance documents (available on the EPA website:
http://www3.epa.gov/ttn/amtic/qalist.html). Give special attention to specific regulations
regarding the use and operation of ambient NOx analyzers (chemiluminescence).
083730200A DCN7962 Teledyne API T200 NO/NO /NO Analyzer with NumaView™ Software 105
2 x