Vacuum Manifold; Figure 6-5. Vacuum Manifold, Standard Configuration - Teledyne T200 User Manual

VACUUM MANIFOLD

The vacuum created by the analyzer's pump is supplied to all of the gas streams for the
analyzer through the vacuum manifold (also called the exhaust manifold).
Configurations will vary depending on the optional equipment that is installed. For
example:
An optional internal span gas generator installed will add another FT8 connector and
•
orifice assembly to the manifold where the FT28 fitting is as shown in the above
drawing.
An optional sample gas dryer will add a Tee-fitting so that two ¼" tubes can be
•
connected to the same port.
083730200A DCN7962

Figure 6-5. Vacuum Manifold, Standard Configuration

Teledyne API T200 NO/NO /NO Analyzer with NumaView™ Software
2 x
185