Connections And Startup; Electrical Connections; Connecting Power - Teledyne T200 User Manual

CONNECTIONS AND STARTUP

This section presents the electrical (Section 2.3.1) and pneumatic (Section 2.3.2)
connections for setting up and preparing the instrument for operation (Section 2.3.3).
E
LECTRICAL
Note

CONNECTING POWER

Attach the power cord between the instrument's AC power connector and a power outlet
capable of carrying at least the rated current at your AC voltage range and ensure that it is
equipped with a functioning earth ground. It is important to adhere to all safety and
cautionary messages.
083730200A DCN7962
C
ONNECTIONS
To maintain compliance with EMC standards, cable length
must be go greater than 3 meters for all I/O connections.
WARNING – Electrical Shock Hazard
• High Voltages are present inside the instrument's case.
• Power connection must have functioning ground connection.
• Do not defeat the ground wire on power plug.
• Turn off instrument power before disconnecting or connecting
electrical subassemblies.
• Do not operate with cover off.
CAUTION – Avoid Damage to the Instrument
Ensure that the AC power voltage matches the voltage indicated on
the instrument's model/specs label before plugging it into line
power.
Teledyne API T200 NO/NO /NO Analyzer with NumaView™ Software
2 x
25