Ac Power Configuration; Figure 6-22. Location Of Ac Power Configuration Jumpers - Teledyne T200 User Manual

AC P
OWER
The analyzer's digital components will operate with any of the specified power regimes.
As long as instrument is connected to 100-120 VAC or 220-240 VAC at either 50 or 60
Hz. Internally, the status LEDs located on the Relay PCA, Motherboard and CPU should
turn on as soon as the power is supplied.
However, some of the analyzer's non-digital components, such as the AC-powered heaters
for the NO
of power being supplied to the instrument.
Configuration of the power circuits is set using several jumper sets located on the
instrument's Relay PCA.
214 Teledyne API T200 NO/NO
C
ONFIGURATION
– NO converter or the reaction cell, must be properly configured for the type
2
RELAY PCA

Figure 6-22. Location of AC power Configuration Jumpers

/NO Analyzer with NumaView™ Software
2 x
JP6
Configuration Jumpers
for Optional AC Heaters
(Internal Perm Tube Oven
Heater)
Configuration Jumpers
for AC Heaters
(O Destruct, Reaction Cell)
3
083730200A DCN7962
JP2