Figure 6-13. Relay Pca Layout (P/N 045230100) - Teledyne T200 User Manual

Thermocouple
Signal Output
(JP5)
Thermocouple
Configuration
Jumpers
TC1 Input
NO à NO Converter
2
Temp Sensor
Pump AC
Configuration
Jumper
Pump Power
Output
AC Power
IN
Connector for
AC Relays
K1 & K2
083730200A DCN7962
Status LED's
(D2 through D16)
J15
J16
J17
JP2
JP7
R16
AC Relay K4
(OPT Internal Span Gen Heater)
J2
AC Relay K2
(NO à NO Converter Heater)
2
AC Relay K1
(Reaction Cell Heater)
Connector for AC Relays K4 & K5

Figure 6-13. Relay PCA Layout (P/N 045230100)

WARNING – ELECTRICAL SHOCK HAZARD
Only those relays actually required by the configuration of the
analyzer are populated.
A protective retainer plate is installed over the AC power relays
to keep them securely seated in their sockets and prevent
accidental contact with those sockets that are not populated
see Figure 6-14).
Never remove this retainer while the instrument is plugged in
and turned on. The contacts of the AC relay sockets beneath
the shield carry high AC voltages even when no relays are
present.
Teledyne API T200 NO/NO
Watchdog
Status LED (D1)
Heater AC Power
Configuration
Jumpers
J12
J11
J10
J9
J18
J8
J7
/NO Analyzer with NumaView™ Software
2 x
DC Power Supply
Test Points
2
I C
Connector
J21
J19
Power
J14
Connection
for DC
Heaters
Valve Control
Drivers
J4
Valve Control
Connector
DC Power
Distribution
Connectors
201