Setup>Events; Figure 2-45. Events List - Teledyne T200 User Manual

S >E
ETUP VENTS
Events are occurrences that relate to any operating function, and are used to define the
conditions that can be set to trigger Alerts (Section 2.4.3). Events can provide diagnostic
information about the instrument, typically referred to as "Warnings", or they can provide
other information on instrument functionality, such as concentration alarms. Some Events
are standard and not editable while others are user-configurable, described here. Existing
Events are listed in the Events page (Figure 2-45) under the Setup menu.

Figure 2-45. Events List

Access the Events Configuration page either from the Active Alerts page (Alerts Menu) by
pressing the configuration button, or through the Home>Setup>Events menu (Figure 2-45).
Press ADD to create a new Event (refer to Figure 2-46 for details), or select an existing
Event to either Edit or Delete it (Figure 2-48).
083730200A DCN7962 Teledyne API T200 NO/NO /NO Analyzer with NumaView™ Software 67
2 x