Figure 2-46. Event Configuration - Teledyne T200 User Manual

•
box to "turn off" or deactivate the Event without deleting it). An Event must be enabled
in order to use the Visible and the Latching options.
•
page when it is triggered (it will still be recorded and can be viewed in the
Utilities>Alerts Log).To use this option, the Event must be enabled.
•
conditions that triggered it were to correct themselves. (Latching requires that the
user interact with the Active Alerts screen to manually clear the Alert and internal
Event state. Non-latching allows the entry in the Active Alerts screen and the internal
Event state to continuously update based on the Event criteria, requiring no user
interaction to clear the Alert or Event state).
68 Teledyne API T200 NO/NO

Figure 2-46. Event Configuration

allows the choice of whether to track and record the Event (uncheck this
allows the choice of whether or not to display the Event in the Alerts
allows the choice of whether or not to keep an Event visible even if the
/NO Analyzer with NumaView™ Software
2 x
083730200A DCN7962