Software Configuration; Summary Of Setup Functions - Teledyne 300 Instruction Manual

Step
1. Press SETUP-DAS-
2. Press PREV/NEXT
3.
4. Press SET> (5 times)
5.
6. Toggle OFF to ON
7.
8. Press EXIT (4 times)
See Section 7.3.1 for more information on DAS reporting through the RS-232 interface.

4.12 Software configuration

The software configuration can be displayed by entering the button sequence
SETUP-CFG-LIST. For example the M300 could display:
Stating that the instrument was an Carbon Monoxide Analyzer using the SBC40
computer. This feature is useful for showing any special features that are present in the
currently installed PROM.

4.13 Summary of setup functions

The setup functions are summarized in Table 4.1 in terms of the button sequences used to
access them.
Button Sequence
SETUP-CFG-LIST
SETUP-ACAL-MODE
SETUP-DAS-EDIT
SETUP-DAS-VIEW
SETUP-RNGE-MODE
SETUP-RNGE-SET
P/N 02163G Teledyne API Model 300 CO Analyzer Instruction Manual - Page 48
Action
EDIT
Press EDIT
Press EDIT
Press ENTR
"CO MACHINE"
"SBC40 CPU"
SETUP FUNCTIONS
Configuration
Define/Change
AutoCal Sequences
Define/Change DAS
Data Channels
View DAS Data
Set Range Mode
Set D/A output range
Comment
Enter DAS menu to edit Data
Channels
Select Data Channel to edit
Edit selected Data Channel
Scroll through setup properties until
RS-232 REPORT: OFF is displayed
Edit selected setup property
Change RS-232 REPORT property
Accepts change
Exits back to sample menu
Function
List Software
Default Limits
CO Mach N/A
Disabled Zero, Span,
Zero-Span
N/A N/A
Single Single,
Dual, Auto
50 ppm 1-1000ppm