Removing The Rotating Unit Covers - KaVo ORTHOPANTOMOGRAPH OP 3D Service Manual

4. Remove the left cover.
5. Unlock the locking clamp from bottom of the right cover.
6. Turn the right cover.
7. Remove the cover.

8.2.4 Removing the rotating unit covers

Removing the rotator back and front cover
Required tools: Allen key 3mm
NOTICE! Turn the rotating unit carefully so that it does not collide with the lower
shelf.
1. Remove the screws (6 pcs) from the top of the rotating unit.
ORTHOPANTOMOGRAPH
™
OP 3D
8 Part replacement instructions
107