Replacing The Pivot And Linear Movement Sensors - KaVo ORTHOPANTOMOGRAPH OP 3D Service Manual

8 Part replacement instructions
2. Push the mains switch out.
NOTICE! Use a screwdriver to loosen the part if required.
3. Pull the switch out and remove it.

8.3.20 Replacing the pivot and linear movement sensors

NOTICE! Upper shelf right and left cover must be removed before this procedure.
Required tools and materials: glue
1. Disconnect the linear movement sensor.
2. Remove the linear movement sensor.
NOTICE! Mark the exact place of the sensor with a marker before you
remove it.
150 ORTHOPANTOMOGRAPH
™
OP 3D