KaVo ORTHOPANTOMOGRAPH OP 3D Service Manual page 89

Error code
E50002
E50003
E51002
E51003
E51004
E51005
E51006
E51007
E52002
E52003
E52004
E53002
E53003
E53004
E54002
E54003
E54004
E54005
ORTHOPANTOMOGRAPH
Problem
Transmit error
Error callback
Init handle
Init channel
Init config
Init start ch1
Init start ch2
Set value
Too high frequency
Error callback
Too large pos diff
Invalid channel
Timer init
Timer start
Program not implemented
Transfer from wrong event
Transfer from wrong program
Event queue full
™
OP 3D
Solution
See E09021
See E09022.
Software error. Take logs and boot the
device.
Software error. Take logs and boot the
device.
Software error. Take logs and boot the
device.
Software error. Take logs and boot the
device.
Software error. Take logs and boot the
device.
Software error. Take logs and boot the
device.
Software error. Take logs and boot the
device.
Software error. Take logs and boot the
device.
Software error. Take logs and boot the
device.
Software error. Take logs and boot the
device.
Software error. Take logs and boot the
device.
Software error. Take logs and boot the
device.
Software error. Take logs and boot the
device.
Software error. Take logs and boot the
device.
Software error. Take logs and boot the
device.
Software error. Take logs and boot the
device.
Software error. Take logs and boot the
device.
Software error. Take logs and boot the
device.
7 Troubleshooting
89