Removing The Upper Shelf Plate; Replacing The Linear And Pivot Movement And Motor - KaVo ORTHOPANTOMOGRAPH OP 3D Service Manual

8 Part replacement instructions

8.3.12 Removing the upper shelf plate

1. Disconnect the cables coming from the linear and pivot motors.
2. Loosen the screws on both sides of the plate.
3. Remove the plate.

8.3.13 Replacing the linear and pivot movement and motor

Before starting the work
NOTICE! You must remove the upper shelf right and left cover before this
procedure.
140 ORTHOPANTOMOGRAPH
™
OP 3D