Fuses - KaVo ORTHOPANTOMOGRAPH OP 3D Service Manual

Refer to User and Installation manual, chapter Mains power configuration for detailed
instructions.
NOTICE! In i4100 back panel board there is a switch (SW1) that is used for
changing, for example, from permanent to plug connection. Refer to User and
Installation manua, chapter Mains power configuration.

4.3.6 Fuses

The allowed main fuse types are listed in the table below. See also
Table 1: Main fuses
Location
i4100
Back panel
External warning light
fuse (i4100)
For fuses in circuit boards, see:
i2000 image capture board
i3000 Main control board
i4000 power supply board
ORTHOPANTOMOGRAPH
Ref
F1 & F2
F3
™
OP 3D
Value Type
220-240Vac Littelfuse 215 (Time-Lag) 10A
(6.3x32mm) Cooper Bussman (Time Delay)
S505H-10-R
100-120Vac Littelfuse 326 (SlowBlow) 15A
(6.3x32mm) Cooper Bussman (Time Delay)
MDA-15
Cooper Bussmann (Time Delay)
S506-2-R
4 Device description
Fusing diagram.
21