KaVo ORTHOPANTOMOGRAPH OP 3D Service Manual page 143

8 Part replacement instructions
1. Loosen the screw on the barrel nut.
2. Turn the barrel nut to remove it.
3. NOTICE! User pliers to turn the nut if it is tight.
Turn the ball nut to loosen it.
4. Pull the linear/pivot movement out.
Replacing the linear/pivot movement
1. Insert the new linear/pivot movement.
2. Tighten the ball nut.
3. Insert the barrel nut.
™
ORTHOPANTOMOGRAPH OP 3D 143