Disclaimer - KaVo ORTHOPANTOMOGRAPH OP 3D Service Manual

1 Disclaimer

1 Disclaimer
ORTHOPANTOMOGRAPH
©
Copyright
ORTHOPANTOMOGRAPH
ORTHOfocus
trademarks of KaVo Kerr Group Finland in the United States and/or other countries.
™
KaVo is either registered trademark or trademark of Kaltenbach & Voigt GmbH in the
United States and/or other countries.
All other trademarks are property of their respective owners.
Documentation, trademark and the software are copyrighted with all rights reserved.
Under the copyright laws the documentation may not be copied, photocopied,
reproduced, translated, or reduced to any electronic medium or machine-readable form
in whole or part, without the prior written permission of PaloDEx Group Oy.
The original language of this manual is English, code 215241 rev 2. In a case of
interpretation disagreement the English text is applied.
PaloDEx Group Oy reserves the right to make changes in specification and features
shown herein, or discontinue the product described at any time without notice or
obligation. Contact your PaloDEx Group Oy representative for the most current
information.
The manufacturer has no liability for consequential damage, personal injury, loss,
damage or expense directly or indirectly caused by the use of the product. No agent,
distributor or other party is authorized to give warranty or other liability on behalf of the
manufacturer with respect to its products.
Manufacturer:
PaloDEx Group Oy
Nahkelantie 160
FI-04300 Tuusula
FINLAND
Tel. +358 10 270 2000
www.kavokerrgroup.com
6
™
OP 3D Service manual, 215241 r4.
2017 by PaloDEx Group Oy. All rights reserved.
™ ™
, OP , ORTHOselect
™
and Low Dose Technology
™
, QUICKcompose
™
are either registered trademarks or
™ ™
, SMARTview ,
ORTHOPANTOMOGRAPH
™
OP 3D