Replacing The Speaker With Cable - KaVo ORTHOPANTOMOGRAPH OP 3D Service Manual

8.3.14 Replacing the speaker with cable

Before starting the work
NOTICE! You must remove the upper shelf right and left cover before this
procedure.
1. Remove the support bar at the end of the upper shelf.
2. Remove the cable clamp from the main cable.
3. Disconnect the connectors from the end of the i3000 board.
4. Turn the protective plate and i3000 board to aside.
Replacing the speaker with cable
NOTICE! The speaker is located on the upper shelf.
ORTHOPANTOMOGRAPH
™
OP 3D
8 Part replacement instructions
145