Table of Contents
Advertisement
Retainer
(at 4 places)
Fuel Pipe
Clamp No.1
A
AVENSIS REPAIR MANUAL (RM1018E)
FUEL
SST
A60818
SST
Insert
A50705
(e)
A60083
A
B12941
B12944
http://vnx.su
–
FUEL SYSTEM (1ZZ–FE/3ZZ–FE)
(3)
Assemble SST to the connection of fuel pipe as
shown in the illustration.
SST
09268–21010
(4)
Turn SST, align the retainers inside the connector
with SST chamfered parts and insert SST into the
connector.
(5)
Slide SST and the connector together towards the
fuel tube assembly.
Observe these following precautions when disconnecting
the fuel tube connector (quick type).
(1)
Remove the fuel pipe clamp No.1.
(2)
Check that there is no dirt or mud on the pipe and
around the connector before disconnecting them.
Clean them if necessary.
(3)
Disconnect the connector from the hose while
pinching part A with fingers as shown in the illustra-
tion.
(4)
When the connector and the pipe are stuck, push
and pull the connector to release and pull the con-
nector out from the pipe carefully.
(5)
Inspect that there is no dirt or mud on the sealing
surface of the disconnected pipe. Clean it away if
necessary.
11–3
Advertisement
Table of Contents
