Notes On Target System Design - NEC mPD780208 Subseries User Manual

B.10 Notes on Target System Design
The following shows the conditions when connecting the emulation probe to the conversion adapter. Follow the
configuration below and consider the shape of parts to be mounted on the target system when designing a system.
Among the products described in this appendix, the NP-100GF-TQ and NP-H100GF-TQ are products of Naito Densei
Machida Mfg. Co., Ltd., and the TGF-100RBP is a product of TOKYO ELETECH CORPORATION.
Table B-2. Distance Between IE System and Conversion Adapter
Emulation Probe
NP-100GF-TQ
NP-H100GF-TQ
Figure B-4. Distance Between IE System and Conversion Adapter
In-circuit emulator
IE-78K0-NS or IE-78K0-NS-A
Emulation board
IE-780208-NS-EM1
CN6
Note Distance when the NP-100GF-TQ is used. When the NP-H100GF-TQ is used, the distance is 370 mm.
APPENDIX B DEVELOPMENT TOOLS
Conversion Adapter
TGF-100RBP
Note
170 mm
Emulation probe
NP-100GF-TQ, NP-H100GF-TQ
User's Manual U11302EJ4V0UM
Distance Between IE System and
Conversion Adapter
170 mm
370 mm
Target system
Conversion adapter: TGF-100RBP
411