APPENDIX B NOTES ON DESIGNING TARGET SYSTEM
This chapter shows areas on the target system where component mounting is prohibited and areas where there
are component mounting height restrictions when the QB-78K0SKX1 is used.
For the package drawings of the target connector, exchange adapter, and emulation probe, see the following
website.
http://www.necel.com/micro/en/development/asia/iecube/outline_QB.html
Figure B-1. When using the 78K0S/Kx1+ emulation probe (For 10-Pin MA Package)
Center point of
Target connector
: Exchange adapter tip area → Components up to 3.5 mm high can be mounted.
: Exchange adapter mounted-component area → Components up to 2.0 mm high can be mounted.
: Target connector area
302
Top view
6.4
9.0
User's Manual U18172EJ2V0UD
Unit : mm
: 1pin