Configuration Of Serial Interface Channel 1 - NEC mPD780208 Subseries User Manual

14.2 Configuration of Serial Interface Channel 1

Serial interface channel 1 consists of the following hardware.
Item
Registers
Control registers
Note Refer to Figure 4-5 Block Diagram of P20, P21, P23 to P26 and
Figure 4-6 Block Diagram of P22 and P27.
CHAPTER 14 SERIAL INTERFACE CHANNEL 1
Table 14-2. Configuration of Serial Interface Channel 1
Serial I/O shift register 1 (SIO1)
Automatic data transmit/receive address pointer (ADTP)
Timer clock select register 3 (TCL3)
Serial operating mode register 1 (CSIM1)
Automatic data transmit/receive control register (ADTC)
Automatic data transmit/receive interval specification register (ADTI)
Port mode register 2 (PM2)
User's Manual U11302EJ4V0UM
Configuration
Note
257