Appendix B Notes On Target System Design - NEC mPD780344 Series User Manual

APPENDIX B NOTES ON TARGET SYSTEM DESIGN

The following shows the conditions when connecting the emulation probe to the conversion adapter. Follow the
configuration below and consider the shape of parts to be mounted on the target system when designing a system.
Among the products described in this appendix, NP-100GC and NP-H100GC-TQ are products of Naito Densei
Machida Mfg. Co., Ltd., and TGC-100SDW is a product of TOKYO ELETECH CORPORATION.
Table B-1. Distance Between IE System and Conversion Adapter (When 100-Pin Plastic LQFP Is Used)
Emulation Probe
NP-100GC
NP-H100GC-TQ
Figure B-1. Distance Between IE System and Conversion Adapter (When 100-Pin Plastic LQFP Is Used)
In-circuit emulator
IE-78K0-NS or IE-78K0-NS-A
Emulation Board
IE-780354-NS-EM1
CN5
Note Distance when the NP-100GC is used. When the NP-H100GC-TQ is used, the distance is 370 mm.
494
Conversion Adapter Distance Between IE System and Conversion Adapter
TGC-100SDW 170 mm
370 mm
Note
170 mm
Emulation Probe
NP-100GC, NP-H100GC-TQ
User's Manual U15798EJ2V0UD
Target system
Conversion adapter: TGC-100SDW