Serial Interface Channel 0 Configuration - NEC 78014Y Series User Manual

15.2 Serial Interface Channel 0 Configuration

Serial interface channel 0 consists of the following hardware.
Refer to Figure 6-6 P20, P21, P23 to P26 Block Diagrams ( µ PD78014 Subseries) and Figure 6-7 P22 and
Note
P27 Block Diagrams ( µ PD78014 Subseries).
www.DataSheet4U.com
CHAPTER 15 SERIAL INTERFACE CHANNEL 0 ( µ PD78014 Subseries)
Table 15-3. Serial Interface Channel 0 Configuration
Item
Register Serial I/O shift register 0 (SIO0)
Slave address register (SVA)
Control register Timer clock select register 3 (TCL3)
Serial operating mode register 0 (CSIM0)
Serial bus interface control register (SBIC)
Interrupt timing specify register (SINT)
Port mode register 2 (PM2)
Configuration
Note
267