Replacement; Front And Center Pillar Retainer/Upper Weatherstrip/Center Pillar Panel - Acura NSX 1997 Service Manual

Main Menu
Front and Center Pillar Retainer/Upper Weatherstrip/
Center Pillar Panel

Replacement

Disassemble in numbered sequence.
CAUTION: Wear gloves to remove and install the retainer.
NOTE:
• Check the upper weatherstrip for damage and deterioration, and replace it if necessary.
• Take care not to bend the front and center pillar retainer.
• After installing the upper weatherstrip, check for water leaks.
• If necessary: Adjust the position of the door glass (see page 20-14).
• If necessary: Replace any damaged clips.
Table of Contents
Center pillar panel removal:
1. Open the door, and remove the center pillar trim
panel (see page 20-38).
2. Remove the mounting nuts from the hole in the
body panel, and pull the center pillar panel out by
hand.
NOTE: Do not drop the mounting nuts inside the
body panel.