Acura NSX 1997 Service Manual page 474

Main Menu
Transmission
Reassembly (cont'd)
8. Install a new conical spring washer and a new lock-
nut on each shaft.
CAUTION: Install the conical spring washers in the
direction shown.
9. Tighten the locknuts to the specified torque.
TORQUE: 137 N-m (14.0 kgf-m, 101 Ibf-ft)
NOTE: The countershaft locknut has left-hand
threads.
Table of Contents
10. Stake each locknut into its shaft using a 3.5 mm
punch.
11. Install the feed pipes and the ball bearing in the left
side cover, aligning the lugs of the 1st and 1st-hold
clutch feed pipes with the grooves in the cover.
12. Install the snap ring.