Main Menu
Stereo Sound System
Power Antenna Motor Replacement
1.
Open the trunk lid, and remove the side trim panel.
2.
Disconnect the 4P connector and antenna lead from
the motor, then remove the antenna nut and three
mounting bolts, and take out the motor with the
antenna mast.
NOTE: Check the O-ring for deformation and dam-
age. If necessary, replace it to prevent a leak.
ANTENNA NUT
3 N-m
(0.3 kgf-m,
2.2 Ibf-ft)
SPACER
BUSHING
4P CONNECTOR
MOTOR
BRACKET
3.
Install in the reverse order of removal.
NOTE: Tighten the antenna nut, then tighten the
three motor bracket mounting bolts.
Table of Contents
ANTENNA NUT
WRENCH
07JAA-001000C
O-RING
Replace.
ANTENNA
LEAD
DRAIN HOSE