Main Menu
Steering Column
Removal
SRS components are located in this area. Review the
SRS component locations, precautions, and procedures
in the SRS
(section
24) before performing repairs or ser-
vice.
1.
Disconnect both the negative cable and positive
cable from the battery.
2.
Remove the driver's airbag assembly and steering
wheel from the column (see page 17-43).
3.
Remove the dashboard lower panel, dashboard
lower pad, and dashboard brace.
4.
Disconnect the connector between the cable reel
and the SRS main harness, then remove the con-
nector holder.
5.
Remove the column lower panel.
Table of Contents
6.
Remove the column covers.
NOTE: Be careful not to damage the column covers.
7.
Disconnect the TCS sensor connector.