Acura NSX 1997 Service Manual page 650

Main Menu
Rear Caliper
Disassembly (cont'd)
7. Remove the circlip, washer, adjusting spring A, and
the adjusting nut from the piston.
8. Remove the piston seal.
CAUTION: Take care not to damage the cylinder
bore.
Table of Contents
9. Adjust the special tool as shown.
BRAKE SPRING
COMPRESSOR
07HAE - SG00100
10. Install the special tool between the caliper body and
spring guide as shown.
11. Compress the adjusting spring B by turning the
shaft of the special tool, then remove the circlip
with snap ring pliers.
SNAP RING
PLIERS
07914-SA50000
BRAKE SPRING
COMPRESSOR
07HAE - SG00100