Acura NSX 1997 Service Manual page 479

Main Menu
19. Install the right driveshaft on the intermediate shaft.
20. Install the lower control arm to the side beam.
CAUTION: Line up the reference marks on the adjusting bolt, adjusting cam, and lower control arm.
21. Install the damper fork bolt.
22. Install the toe control arm to the side beam.
CAUTION: Make sure that the reference marks on the toe control arm are aligned.
23. Install the wheel sensor wire clamp and parking brake cable holder.
24. Install the front exhaust pipe A.
25. Install the rear beam rod.
26. Install the parking brake cable.
Table of Contents