Parking Pin Switch - Acura NSX 1997 Service Manual

Main Menu
Interlock System
Parking Pin Switch Test/Replacement
1. Remove the center console panel and dashboard
(see section 20).
2. Disconnect the 2P connector of the parking pin
switch from the floor wire harness.
3. Check for continuity between the terminals in each
switch lever position according to the table.
Terminal
Position
Pressed
Push
button
Released
View from
terminal side
PRESS
PUSH
BUTTON
4. If necessary, replace the parking pin switch.
Table of Contents
A
2P
CONNECTOR

PARKING PIN SWITCH

5. Remove the self-locking nut and parking pin switch.
B
PARKING PIN
SWITCH
SELF-LOCKING NUT
Replace.
3 N-m (0.3 kgf-m, 2.2 Ibf-ft)
2P
CONNECTOR