Table of Contents
Advertisement
Main Menu
18. Remove the knuckle.
19. Separate the lower control arm and damper by
removing the damper mounting bolt.
DAMPER
MOUNTING
BOLT
Table of Contents
KNUCKLE
Corrosion resistant bolt/nut
SELF-LOCKING NUT
12 x 1.25 mm
Replace.
93 N-m (9.5 kgf-m, 69 Ibf-ft)
20. Hold the ball pin of the stabilizer link with a hex
wrench, and loosen the self-locking nut.
STABILIZER
LINK
LOWER CONTROL
ARM
SELF-LOCKING NUT
12 x 1.25 mm
Replace.
83 N-m (8.5 kgf-m, 61 Ibf-ft)
21. Disconnect the stabilizer link from the lower control
arm.
HEX WRENCH
Corrosion resistant bolt/nut
Advertisement
Chapters
Table of Contents
Troubleshooting
