Acura NSX 1997 Service Manual page 596

Main Menu
7. Remove the flat head screws. Install two 8 x 12 mm
bolts into the disc to push it away from the hub.
NOTE: Turn each bolt two turns at a time to prevent
cocking the disc excessively.
BRAKE DISC
8. Remove the hub unit from the knuckle.
Corrosion resistant bolt/nut
Table of Contents
FLAT HEAD SCREW
6 x 1.0 mm
9.8 N-m (1.0 kgf-m, 7 Ibf-ft)
8 x 12 mm
BOLTS
SELF-LOCKING NUT
10 x 1.25 mm
Replace.
64 N-m (6.5 kgf-m, 47 Ibf-ft)
FRONT HUB UNIT
Front Wheel Bearing Replacement:
1. Raise the locking tab on the spindle nut, then remove
the nut.
SPINDLE NUT
26 x 1.5 mm
Replace.
2. Remove the pulser using a two-jaw puller.
TWO-JAW
PULLER
(Commercially
available)
Unstake
PULSER