Acura NSX 1997 Service Manual page 806

Table of Contents

Advertisement

Main Menu
Front Pillar Seal/Retainer
Replacement (cont'd)
11. Install the front pillar retainer.
NOTE:
• Be careful not to touch the front pillar retainer
where sealant will be applied.
• First tighten the screw at top of the front pillar
retainer.
Screw locations, 7
FRONT PILLAR
RETAINER
12. Apply new sealant to the body and retainers on
each side as shown.
Sealant locations
(Cemedine P/N 08712 - 0004, or equivalent)
EPT
SEALER
10 mm (0.39 in) min
FRONT PILLAR
RETAINER
Table of Contents
First tighten.
RETAINER
SEALANT
13. Peel the separator off from the butyl tapes on the
new front pillar seal.
NOTE: Fold the separator of the butyl tape at the
roof portion of the front pillar seal.
SEPARATOR
SEPARATOR
Peel off.
BUTYL
TAPES
Fold it.
BUTYL
TAPES
FRONT PILLAR
SEAL
SEPARATORS
Peel off.

Advertisement

Table of Contents
loading

Table of Contents